新产品
Rod for ejection of cooled inserts
Rod for ejection of cooled inserts
The rod SER allows for the simple and compact realization of the conditioning circuit for the extraction inserts. The fluid passage occurs through the drilled rods and the appropriately shaped fixing screw.
The system is supplied with a kit of FKM seals for high-temperature applications.

> 进入相应章节
Insert extractor
Insert extractor
We have implemented the design of the insert extractor to make it more user-friendly in molding departments.
The insert extractor is fully integrated into the mold and can be operated using a standard hex key. The system has a built-in torque insert that defines the maximum applicable clamping torque, preserving its proper functioning.

> 进入相应章节
Stem seal for needle valve
Stem seal for needle valve
To optimize the operation of the needle valve VASP, it is possible to apply the T-VASP stem seal in order to create a dedicated chamber for retraction that is isolated from the air delivery channel in the cavity. This application can also be useful in case the VASP valve is intended to aspirate air from the cavity to create a vacuum before molding.

> 进入相应章节
DT release rod updated geometry
DT release rod updated geometry
We have updated the geometry of the release rod for DT systems to ensure superior performance even in demanding applications, while keeping the application simplicity unchanged.

> 进入相应章节
机械升降机
机械升降机
升降机CAM是一种简单而有效的解决方案,可以释放注塑模具中的底切。叶片完全是机械性运动,保证了高可靠性,DLC涂层保证了低磨损和自润滑功能。机身和叶片都可以加工成所需的几何形状。特殊尺寸和双重布局可按需提供。

> 进入相应章节
机械可折叠型芯
机械可折叠型芯
机械可折叠型芯由内核和一些通过适当设计的导向系统连接的分段组成。在顶出阶段,这些分段沿内芯滑动,进行径向运动,这允许释放内部底切。圆形、方形或椭圆形零件上的内部底切在顶出过程中很容易释放。也可以释放多头螺纹或右旋及左旋螺纹组合。使用机械可折叠型芯注射的零件尺寸稳定性符合最高要求。平面度和圆度均可达到±0.02mm的精度。

> 进入相应章节
杆缩回锁定=
杆缩回锁定=
全电动吹塑机的使用越来越多,导致了对无需液压致动器的模具需求。CAP是易于使用的锁定气动致动器,能够满足储罐吹塑应用的技术要求,机械保持技术能够在活塞杆缩回位置承受1300 Kg的力。

> 进入相应章节
标记装置
标记装置
标记装置允许快速组装和拆卸模塑嵌件。该系统由一个主体和一个半球形嵌件组成,主体用螺钉固定在模具中,半球形嵌件可轻松放入主体中并倾斜至挂钩位置。在靠近参考点的位置施加一个力,可以轻松地进行拆卸。拆卸工具上的磁铁可轻松取出插入件。插入件无标记,带有标准回收符号或特殊标记。

> 进入相应章节
Standard Lifter
Standard Lifter
STANDARD LIFTER is a semi-finished product designed for the production of undercut release components in plastic injection moulds.
STANDARD LIFTER can be fixed on the milling machine with both clamping vice and fast clamping system on drilled pallets. Thanks to its design and to a machining jig all workpiece's faces are easily accessible for milling operations.
STANDARD LIFTER, available in a wide dimensional range, allows reducing design and machining time leading to a vast time and cost saving during the production process.

> 进入相应章节
Sensor module
Sensor module
Sensor module is a device developed to detect the presence of an insert in overmolding injection process.
The device is easy to apply and allows for a setting of the reading distance from the parting line. The sensor module is available with an embedded magnet.
Sensor module can be connected to the logic distributor LD - ...designed to deliver an enabling signal to the injection moulding machine when all the connected sensors are activated.

> 进入相应章节
可拆式镶件
可拆式镶件
可拆式镶件EI是一种机械装置,设计用于即使注塑机内部夹紧时也能方便地组装和拆卸模具镶件。 伞形齿轮驱动一个螺钉以紧固和松开镶件。 大体积的设计使机件具有良好的拧紧扭矩和持久的使用寿命。

> 进入相应章节
紧锁汽缸
紧锁汽缸
侧向活动CA紧锁汽缸,在注塑过程中,可承受注塑压力。紧凑型的设计,可使整个汽缸安装于模具内部,从而减小模具尺寸。拉杆不会转动,可使汽缸很好地用于特殊形状的模腔内。汽缸可以利用空气进行工作,同时不会减小紧锁抗压力。

> 进入相应章节
排气顶针SGDE
排气顶针SGDE
排气顶针SGDE在普通顶针上应用了动态排气技术,该技术是一个简单机械系统,气体从排气孔排出后,在塑料流前端的压力作用下排气孔会自动关闭。排气顶针可以安装在模腔内困气问题较严重的位置,或者是最后注塑点。排气孔不受模腔内沉积物的影响。同时得益于强大地排气能力,模腔内气体的反向压力会显著下降。

> 进入相应章节
新型SGD动态气体排气阀
新型SGD动态气体排气阀
新型SGD动态气体排气阀是一种创新型解决方案,能够有效解决型腔内排气性能差的最常见的问题。SGD基于一个简单的机械系统,允许气体从排气孔排出,并且在前方塑性流动压力下自动关闭。SGD可以安置在型腔内,供料中会产生气藏。排气孔不受模具沉积物影响,得益于高性能的排气能力使得型腔内的空气反压力大大减少。

> 进入相应章节
内部隔水片
内部隔水片
通过使用适当的工具,可以轻松地将内部隔水片固定在冷却通道内。快速装配技术允许内部隔水片在高达0.4毫米的加大孔内轻松拔出,机械固定和液压密封。内部隔水片可应用于大型模具中,从而减少隔水片长度,优化热调节。

> 进入相应章节
O形圈适用于高温
O形圈适用于高温
O型圈的最高工作温度随流体的类型而改变。
ERMANNO BALZI冷却零部件配有FKM O型圈,适用于高达150°C的加压水或油。

如果使用时需要流体循环如蒸汽、高温下的加压水或油,我们建议使用特定研发的用特殊FKM化合物制成的O型圈以确保更好的性能。
  • 用于蒸汽或加压水的O型圈,适用于工作温度高达190 - 200°C,峰值温度高达220°C.
  • 适用于导热油的O型圈,适用于工作温度高达200 - 220°C,峰值温度高达250 - 270°C.