In-parallel bubbles - Set "F" and Set "Standard"
Set F:
In-parallel bubbles Set F
In parallel bubbles are based on rapid plug and unplug technology that simplifies and speeds up the machining of seats with regard to assembly and disassembly procedures of mold cooling components. The design of the bubble allows in-parallel feeding of several cooling pipes, which keeps the temperature of the heat transfer medium stable. Thanks to the broad dimensional range you will find the standard solution that fits your application.

We advise using set F bubbles whenever the required tolerance (0/+0.1 mm) of the cooling channel is met and the surface quality is sufficient to guarantee the O-ring sealing.
COD.
DXF.DXF
STP.STP
RFP-8F-2x150
RFP-8F-2x300
RFP-8F-2x450
RFP-8F-2x600
RFP-8F-3x150
RFP-8F-3x300
RFP-8F-3x450
RFP-8F-3x600
RFP-8F-4x150
RFP-8F-4x300
RFP-8F-4x450
RFP-8F-4x600
RFP-10F-2,5x150
RFP-10F-2,5x300
RFP-10F-2,5x450
RFP-10F-2,5x600
COD.
DXF.DXF
STP.STP
RFP-10F-3x150
RFP-10F-3x300
RFP-10F-3x450
RFP-10F-3x600
RFP-10F-4x150
RFP-10F-4x300
RFP-10F-4x450
RFP-10F-4x600
RFP-10F-5x150
RFP-10F-5x300
RFP-10F-5x450
RFP-10F-5x600
RFP-12Fx150
RFP-12Fx300
RFP-12Fx450
RFP-12Fx600
COD.
DXF.DXF
STP.STP
RFP-14Fx150
RFP-14Fx300
RFP-14Fx450
RFP-14Fx600
RFP-16Fx150
RFP-16Fx300
RFP-16Fx450
RFP-16Fx600
RFP-20Fx150
RFP-20Fx300
RFP-20Fx450
RFP-20Fx600
RFP-25Fx150
RFP-25Fx300
RFP-25Fx450
RFP-25Fx600
Set Standard:
In-parallel bubbles Set Standard
In-parallel bubbles are based on rapid plug and unplug technology that simplifies and speeds up the machining of seats with regard to assembly and disassembly procedures of mold cooling components. The design of the bubble allows in-parallel feeding of several cooling pipes, which keeps the temperature of the heat transfer medium stable. Thanks to the broad dimensional range you will find the standard solution that fits your application.

We advise using set standard bubbles whenever the required tolerance (0/+0.1 mm) of the cooling channel is not met or the surface quality is insufficient to guarantee the O-ring sealing.
COD.
DXF.DXF
STP.STP
RFP-8-2x150
RFP-8-2x300
RFP-8-2x450
RFP-8-2x600
RFP-8-3x150
RFP-8-3x300
RFP-8-3x450
RFP-8-3x600
RFP-8-4x150
RFP-8-4x300
RFP-8-4x450
RFP-8-4x600
COD.
DXF.DXF
STP.STP
RFP-10-2,5x150
RFP-10-2,5x300
RFP-10-2,5x450
RFP-10-2,5x600
RFP-10-3x150
RFP-10-3x300
RFP-10-3x450
RFP-10-3x600
RFP-10-4x150
RFP-10-4x300
RFP-10-4x450
RFP-10-4x600
COD.
DXF.DXF
STP.STP
RFP-10-5x150
RFP-10-5x300
RFP-10-5x450
RFP-10-5x600
RFP-12x150
RFP-12x300
RFP-12x450
RFP-12x600
RFP-14x150
RFP-14x300
RFP-14x450
RFP-14x600