In-series bubbles - Set "F" and Set "Standard"
Set F:
In-series bubbles Set F
In-series bubbles are based on rapid plug and unplug technology that simplifies and speeds up the machining of seats with regard to assembly and disassembly procedures of mold cooling components. The design of the bubble allows there to be only one hole both for inlet and outlet of the heat transfer medium. Thanks to the broad dimensional range you will find the standard solution that fits your application.

We advise using set F bubbles whenever the required tolerance (0/+0.1 mm) of the cooling channel is met and the surface quality is sufficient to guarantee the O-ring sealing.
COD.
DXF.DXF
STP.STP
RF-6F
-
RF-8F-2x150
RF-8F-2x300
RF-8F-2x450
RF-8F-2x600
RF-8F-3x150
RF-8F-3x300
RF-8F-3x450
RF-8F-3x600
RF-8F-4x150
RF-8F-4x300
RF-8F-4x450
RF-8F-4x600
RF-10F-2,5x150
RF-10F-2,5x300
RF-10F-2,5x450
COD.
DXF.DXF
STP.STP
RF-10F-2,5x600
RF-10F-3x150
RF-10F-3x300
RF-10F-3x450
RF-10F-3x600
RF-10F-4x150
RF-10F-4x300
RF-10F-4x450
RF-10F-4x600
RF-10F-5x150
RF-10F-5x300
RF-10F-5x450
RF-10F-5x600
RF-12Fx150
RF-12Fx300
RF-12Fx450
COD.
DXF.DXF
STP.STP
RF-12Fx600I
RF-14Fx150I
RF-14Fx300I
RF-14Fx450I
RF-14Fx600I
RF-16Fx150I
RF-16Fx300I
RF-16Fx450I
RF-16Fx600I
RF-20Fx150I
RF-20Fx300I
RF-20Fx450I
RF-20Fx600I
RF-25Fx150I
RF-25Fx300I
RF-25Fx450I
RF-25Fx600I
Set Standard:
In-series bubbles Set Standard
In-series bubbles are based on rapid plug and unplug technology that simplifies and speeds up the machining of seats with regard to assembly and disassembly procedures of mold cooling components. The design of the bubble allows there to be only one hole both for inlet and outlet of the heat transfer medium. Thanks to the broad dimensional range you will find the standard solution that fits your application.

We advise using set standard bubbles whenever the required tolerance (0/+0.1 mm) of the cooling channel is not met or the surface quality is insufficient to guarantee the O-ring sealing.
COD.
DXF.DXF
STP.STP
RF-8-2x150
RF-8-2x300
RF-8-2x450
RF-8-2x600
RF-8-3x150
RF-8-3x300
RF-8-3x450
RF-8-3x600
RF-8-4x150
RF-8-4x300
RF-8-4x450
RF-8-4x600
COD.
DXF.DXF
STP.STP
RF-10-2,5x150
RF-10-2,5x300
RF-10-2,5x450
RF-10-2,5x600
RF-10-3x150
RF-10-3x300
RF-10-3x450
RF-10-3x600
RF-10-4x150
RF-10-4x300
RF-10-4x450
RF-10-4x600
COD.
DXF.DXF
STP.STP
RF-10-5x150
RF-10-5x300
RF-10-5x450
RF-10-5x600
RF-12x150
RF-12x300
RF-12x450
RF-12x600
RF-14x150
RF-14x300
RF-14x450
RF-14x600