Spiral baffles - Set "F" and Set "Standard"
Set F:
Spiral baffles set F
Spiral baffles are based on rapid plug and unplug technology that simplifies and speeds up the machining of seats with regard to assembly and disassembly procedures of mould cooling components. The spiral pattern ensures a uniform temperature throughout the entire surface and it also fosters a turbulent flow that allows for greater heat release. Thanks to the broad dimensional range you will find the standard solution that fits your application.

We advise using set F baffles whenever the required tolerance (0/+0.1 mm) of the cooling channel is met and the surface quality is sufficient to guarantee the O-ring sealing.
COD.
DXF.DXF
STP.STP
RLS-6Fx100
RLS-6Fx200
RLS-6Fx300
RLS-8Fx100
RLS-8Fx200
RLS-8Fx300
RLS-10Fx100
RLS-10Fx200
RLS-10Fx300
RLS-12Fx100
RLS-12Fx200
RLS-12Fx300
RLS-14Fx100
COD.
DXF.DXF
STP.STP
RLS-14Fx200
RLS-14Fx300
RLS-15,5Fx150
RLS-15,5Fx300
RLS-15,5Fx450
RLS-15,5Fx600
RLS-16Fx150
RLS-16Fx300
RLS-16Fx450
RLS-16Fx600
RLS-19,5Fx150
RLS-19,5Fx300
RLS-19,5Fx450
COD.
DXF.DXF
STP.STP
RLS-19,5Fx600
RLS-20Fx150
RLS-20Fx300
RLS-20Fx450
RLS-20Fx600
RLS-24,5Fx150
RLS-24,5Fx300
RLS-24,5Fx450
RLS-24,5Fx600
RLS-25Fx150
RLS-25Fx300
RLS-25Fx450
RLS-25Fx600
Set Standard:
Spiral baffles set Standard
Spiral baffles are based on rapid plug and unplug technology that simplifies and speeds up the machining of seats with regard to assembly and disassembly procedures of mould cooling components. The spiral pattern ensures a uniform temperature throughout the entire surface and it also fosters a turbulent flow that allows for greater heat release. Thanks to the broad dimensional range you will find the standard solution that fits your application.

We advise using set standard baffles whenever the required tolerance (0/+0.1 mm) of the cooling channel is not met or the surface quality is insufficient to guarantee the O-ring sealing.
COD.
DXF.DXF
STP.STP
RLS-6x100
RLS-6x200
RLS-6x300
RLS-8x100
RLS-8x200
COD.
DXF.DXF
STP.STP
RLS-8x300
RLS-10x100
RLS-10x200
RLS-10x300
RLS-12x100
COD.
DXF.DXF
STP.STP
RLS-12x200
RLS-12x300
RLS-14x100
RLS-14x200
RLS-14x300