Straight baffles - Set "F" and Set "Standard"
Set F:
Straight baffles Set F
Straight baffles are based on rapid plug and unplug technology that simplifies and speeds up the machining of seats with regard to assembly and disassembly procedures of mould cooling components.
Thanks to the broad dimensional range you will find the standard solution that fits your application.

We advise using set F baffles whenever the required tolerance (0/+0.1 mm) of the cooling channel is met and the surface quality is sufficient to guarantee the O-ring sealing.
COD.
DXF.DXF
STP.STP
RL-6Fx100
RL-6Fx200
RL-6Fx300
RL-8Fx100
RL-8Fx200
RL-8Fx300
RL-10Fx100
RL-10Fx200
RL-10Fx300
RL-12Fx100
RL-12Fx200
RL-12Fx300
RL-14Fx100
RL-14Fx200
RL-14Fx300
RL-15Fx150
-
RL-15Fx300
-
COD.
DXF.DXF
STP.STP
RL-15Fx450
-
RL-15Fx600
-
RL-15,5Fx150
RL-15,5Fx300
RL-15,5Fx450
RL-15,5Fx600
RL-16Fx150
RL-16Fx300
RL-16Fx450
RL-16Fx600
RL-19Fx150
RL-19Fx300
RL-19Fx450
RL-19Fx600
RL-19,5Fx150
RL-19,5Fx300
RL-19,5Fx450
COD.
DXF.DXF
STP.STP
RL-19,5Fx600
RL-20Fx150
RL-20Fx300
RL-20Fx450
RL-20Fx600
RL-24,5Fx150
RL-24,5Fx300
RL-24,5Fx450
RL-24,5Fx600
RL-25Fx150
RL-25Fx300
RL-25Fx450
RL-25Fx600
RL-30Fx150
RL-30Fx300
RL-30Fx450
RL-30Fx600
Set Standard:
Straight baffles set Standard
Straight baffles are based on rapid plug and unplug technology that simplifies and speeds up the machining of seats with regard to assembly and disassembly procedures of mould cooling components.
Thanks to the broad dimensional range you will find the standard solution that fits your application.

We advise using set standard baffles whenever the required tolerance (0/+0.1 mm) of the cooling channel is not met or the surface quality is insufficient to guarantee the O-ring sealing.
COD.
DXF.DXF
STP.STP
RL-6x100
RL-6x200
RL-6x300
RL-8x100
RL-8x200
COD.
DXF.DXF
STP.STP
RL-8x300
RL-10x100
RL-10x200
RL-10x300
RL-12x100
COD.
DXF.DXF
STP.STP
RL-12x200
RL-12x300
RL-14x100
RL-14x200
RL-14x300