Mold parts and components
- Cooling
- Plate sequence control
- Mold venting
- Air valve
- Slides and retainers
- Undercuts
- Gas injector
- Locking cylinder
- Degating
- Accessories
- Daters and marking
- Cooling test station
- Hydraulic cylinder test station
- Descaling circuit test station
-
CUSTOMER CARE
Telephone +39.030.2120868
Rod for ejection of cooled inserts
The rod SER allows for the simple and compact realization of the conditioning circuit for the extraction inserts. The fluid passage occurs through the drilled rods and the appropriately shaped fixing screw.
The system is supplied with a kit of FKM seals for high-temperature applications.
> Download STP
| COD. | A | B | C | D | E | F | G | CH |  |
|---|---|---|---|---|---|---|---|---|---|
| S-SER16300 | 16 | M16X1,5 | 6 | 13,8 | 4 | 13 | 50 | 14 | - |
| S-SER16500 | 16 | M16X1,5 | 6 | 13,8 | 4 | 13 | 50 | 14 | - |
| S-SER20300 | 20 | M20X1,5 | 8 | 17,6 | 4 | 16 | 50 | 18 | - |
| S-SER20500 | 20 | M20X1,5 | 8 | 17,6 | 4 | 16 | 50 | 18 | - |
| S-SER25300 | 25 | M20X1,5 | 8 | 17,6 | 4 | 16 | 50 | 22 | - |
| S-SER25500 | 25 | M20X1,5 | 8 | 17,6 | 4 | 16 | 50 | 22 | - |
